HP920 GNSS Receiver

Plaats van herkomst:China
Merknaam:Haipai Marine
Modelnummer:HP920
Minimale bestelhoeveelheid:1SET
Prijs:contact us
Betalingsvoorwaarden:T/T
Leveringscapaciteit:100 setjes per maand
Productdetails
Markeren:

HP920 GNSS surveying receiver

,

GNSS receiver with high accuracy

,

HP920 RTK GNSS system
Productbeschrijving
Product Introduction:

The HP920 GNSS Receiver is a newly developed positioning and orientation system. It features an integrated dual-satellite antenna, high-precision GNSS board, radio communication module, inertial navigation system (INS) module, and 4G capabilities, enabling both single-antenna positioning and dual-antenna orientation functions. This receiver is designed for maritime applications but can also be widely used in engineering machinery and agricultural navigation.

Key Features:
  • High Precision, Low Power Consumption: The receiver uses high-precision modules supporting BeiDou, GPS, GLONASS, Galileo, and QZSS systems, ensuring accurate positioning even in complex environments.
  • SBAS & PPP Support: Supports SBAS and precise point positioning (PPP) for high-accuracy heading without the need for a fixed base station.
  • Compatibility: Works with various GNSS high-precision positioning and orientation cards, enabling BeiDou-only solutions.
  • Wide Voltage Input: Operates on a wide voltage range from 9V to 36V DC, with protection against reverse polarity.
  • Built-in Wi-Fi Module: Features an embedded web interface, allowing device configuration via Wi-Fi.
  • Integrated Design: Easy to install with standard IP67 waterproof and dustproof protection, designed for quick attachment to boat surfaces or brackets.
  • High-Precision Inertial Navigation: Equipped with an integrated six-axis gyroscope for accurate attitude measurements.
  • Optional Modules: Available with optional built-in radio and satellite communication modules.
  • eSIM Connectivity: Supports eSIM, allowing connection to CORS signals for centimeter-level positioning.
Technical Specifications:
Signal Tracking BDS B1I/B2I/B3I/B1C/B2b
GPS L1C/A/L2P(Y)/L2C/L5
Galileo E1/E5a/E5b/E6
GLONASS G1/G2
QZSS L1C/A/L2/L5
SBAS L1C/A
Single Point Positioning Horizontal: 1.5m
Vertical: 2.5m
RTK Accuracy Horizontal: ±(8+1.0*10⁻⁶*D) mm
Vertical: ±(15+1.0*10⁻⁶*D) mm
Cold Start Time ＜30s
Initialization Time < 5s (typical value)
Initialization Reliability ＞ 99.9%
Data Update Rate 20Hz
Speed Accuracy 0.03m/s
Heading Accuracy ＜0.3°rms
Electrical Parameters Power Consumption ≤4.0W
Supply Voltage 9～36V DC
Physical Characteristics Operating Temperature -45℃～+75℃
Storage Temperature -55℃～+85℃
Physical Size 634mm*165mm*94mm
Indicator Light 1 power light
Protection Level IP67
Weight Approx. 1.5kg
Data Interface Data Output NMEA-0183, Binary Code
Data Refresh Rate 20Hz
Serial Port Baud Rate 9600~460800
Data Interface 18-pin Amphenol connector (includes 2x RS232, 1x RS422, 1x USB)
Differential Format RTCM3.X
Communication Full Network 4G module, Radio Communication Module
Network Protocol TCP,NTRIP
USB (Optional) USB2.0
Applications:

Ideal for maritime applications, the HP920 GNSS receiver is also well-suited for engineering machinery and agricultural navigation.

HP920 GNSS Receiver 0 HP920 GNSS Receiver 1 HP920 GNSS Receiver 2


Productoverzicht

Product Introduction: The HP920 GNSS Receiver is a newly developed positioning and orientation system. It features an integrated dual-satellite antenna, high-precision GNSS board, radio communication module, inertial navigation system (INS) module, and 4G capabilities, enabling both single-antenna ...

Verzoek sturen
Gerelateerde producten
Neem contact met ons op
U kunt ons altijd contacteren